SMT2.0
The most productive B3 machine
The main reasons for choosing an SMT2.0:
- Because it is the most USER-FRIENDLY laminator made in the EU.
- Because of its automatic and easy-to-use automatic feeder
- Because it only occupies 3 m2 IN USE and 2 m2 when stopped.
- Because it incorporates a silent compressor.
- Because you can stamp toner prints with the TAULER_FOIL system.
- For its intuitive touchscreen.
- Because it incorporates a REVERSE MODE to correct possible errors.
- Because it incorporates non-stick rollers for easy use.
- Because it incorporates TAULER_GO ON, an automatic starting system.
Technical specifications:
- Fully automatic sheet feed and cutting system.
- Adjustable side bracket.
- Temperature control via sensor.
- Pneumatic pressure roller.
- Easily adjustable decurling system.
- Photocell that stops the machine in case of sheet failure.
- 2 complete film holders to facilitate a quick change.
- Total control of the machine through a PLC.
- Electronically adjustable speed.
- Microperforation cutting system and scissor roller.
Length [A]: 170 cm
Width [B]: 73 cm
Height [C]: 147 cm
Weight: 600 kg
Rellena el siguiente formulario y obtén nuestro catálogo.
"*" indicates required fields
| Maximum format | 450 x 690 mm |
| Minimum format | 210 x 250 mm |
| Maximum mechanical speed | 2 – 12 m/min* |
| Paper thickness | 120 to 450 g/m2 |
| Input/Output stack height | 22 cm |
| Film thickness | 20 to 50 microns |
| Installed electrical power | Power supply |
| 230 V single-phase 50 Hz | Safety |
| CE-compliant protections, emergency stops, and safety sensors. | The image shown and the information reflected in this web & brochure do not constitute contractual information. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the specifications of this product without prior notice. TAULER AND PRINTLAM ARE REGISTERED TRADEMARKS OF TAULER LAMINATING TECH, SL TAULER AND PRINTLAM ARE REGISTERED TRADEMARKS OF TAULER LAMINATING TECH, SL
Formulario de Contacto
"*" indicates required fields