SMT4.0
The B2 machine for demanding production
The main reasons for choosing a TAULER SMT4.0:
- Because it incorporates the TAULER_OIL system that improves lamination and reduces energy consumption.
- Because it incorporates quick coil adjustment while the machine is running.
- Because it incorporates the TAULER_SHAFT SYSTEM that facilitates the quick change of film.
- Because it can produce toner prints using its TAULER_FOIL system (optional).
- Because it features non-stick rollers for ease of use.
- For its intuitive touch screen.
- Because it incorporates a REVERSE MODE to correct possible errors.
- Because it incorporates TAULER_GO ON, an automatic starting system.
Technical specifications:
- Automatic feeding with frontal suction and two suckers.
- Adjustable side bracket.
- Temperature control by sensor.
- Pneumatic pressure roller.
- Easily adjustable decurling system.
- Photocell that stops the machine in case of sheet failure.
- Total control of the machine through a PLC.
- Electronically adjustable speed.
- Microperforation cutting system and scissor roller.
Length [A]: 250 cm
Width [B]: 120 cm
Height [C]: 155 cm
Weight: 1000 kg
Fill out the following form and get our catalog.
"*" indicates required fields
STACKER
Rolling mill assembly: (3515 x 1545 x 1403 mm)
XL TABLE EXTENSION
(55 x 105 cm)
FOIL KIT
AUTOMATIC DISPATCH TABLE
Technical data
| Maximum format | 550 x 790 mm |
| Minimum format | 220 x 250 mm |
| Maximum mechanical speed | 2 – 25 m/min* |
| Paper thickness | 120 to 600 g/m2 |
| Input/Output stack height | 650 mm |
| Film thickness | 20 to 50 microns |
| Installed electrical power | 8 kW |
| Power supply | 380 V three-phase 50 Hz |
| Safety | CE-compliant protections, emergency stops, and safety sensors. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the specifications of this product without prior notice. The image shown and the information reflected in this website & brochure do not constitute contractual information. TAULER AND PRINTLAM ARE REGISTERED TRADEMARKS OF TAULER LAMINATING TECH, SL
Formulario de Contacto
"*" indicates required fields