SMT2.0
The most productive B3 machine
The main reasons for choosing an SMT2.0:
- Because it is the MOST FRIENDLY laminator made in the EU.
- Because its automatic feeder system facilitates the task for the operator.
- Because it only occupies 3 m2 IN USE and 2 m2 when stopped.
- Because it incorporates a silent compressor.
- Because it can stamp toner prints with its TAULER_FOIL system.
- For its intuitive touchscreen.
- Because it incorporates a REVERSE MODE to correct potential errors.
- Because it incorporates non-stick rollers for easy use.
- Because it features the TAULER_GO ON automatic starting system.
Technical specifications:
- Fully automatic laminator for feeding and cutting.
- Adjustable side brackets.
- Temperature control via sensor.
- Pneumatic pressure roller.
- Easily adjustable decurling system.
- Photocell that stops the machine in case of sheet failure.
- 2 complete film holder shafts to facilitate a quick change.
- Total machine control through a PLC.
- Electronically adjustable speed.
- Microperforation cutting system and scissor roller.
Length [A]: 170 cm
Width [B]: 73 cm
Height [C]: 147 cm
Weight: 600 kg
Fill out the following form and get our catalog.
"*" indicates required fields
Technical data
| Maximum format | 450 x 690 mm |
| Minimum format | 210 x 250 mm |
| Speed | 2 – 12 m/min* |
| Paper thickness | 120 to 450 g/m2 |
| Input Stack Height | 22 cm |
| Film Thickness | 20 to 50 microns |
| Installed Electrical Power | 3.5 kW |
| Power Supply | 230 V single-phase 50 Hz |
| Safety | CE-compliant protections, emergency stops, and safety sensors. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the specifications of its products in catalogs and website without prior notice. The image shown and the information reflected in this brochure do not establish contractual information. TAULER AND PRINTLAM ARE REGISTERED TRADEMARKS OF TAULER LAMINATING TECH, SL
Contact Form
"*" indicates required fields
