SMT1.0
Entry-level automated machine
The main reasons for choosing an SMT1.0:
· Because it is ready to work in 5 minutes.
· Because it is easy to use.
· Because of its intuitive touch screen.
· Because it incorporates a REVERSE MODE to correct possible errors.
· Because it has a TAULER_GO ON (automatic start-up system).
· Because it only occupies 1.5m2.
· Because you can move it easily.
Advanced specifications:
- Automatic front suction feed.
- Adjustable side guides.
- Sensor-controlled temperature.
- Hydraulically operated pressure roller.
- Easily adjustable anti-curl system.
- Photocells that stop the machine in case of sheet failure.
- Total machine control via PLC.
- Electronically adjustable speed.
- Micro-perforated cutting system and scissor roller.
Maximum length [A]: 265 cm
Maximum width [B]: 68 cm
Maximum height [C]: 165 cm
Weight: 200 Kg
Fill out the following form and get our catalog.
"*" indicates required fields
Technical details
| Maximum format | 340 x 1000 mm |
| Minimum format | 148 x 210 mm |
| Maximum mechanical speed | 5 – 10 m/min* |
| Paper thickness | 150 to 400 g/m2 |
| Input/Output stack height | 450 mm |
| Film thickness | 20 to 50 μm |
| Installed electrical power |
2.2 kW |
| Power supply | 220 V single-phase 50 Hz |
| Safety | Protections according to CE standards, emergency stop, and safety sensors. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the characteristics of this product without prior notice. The image shown and the information reflected in this web & brochure do not establish contractual information. TAULER AND PRINTLAM ARE REGISTERED TRADEMARKS OF TAULER LAMINATING TECH, SL
Formulario de Contacto
"*" indicates required fields