SMT4.0-S
The B2 machine for demanding production
Main reasons to choose a TAULER SMT4.0-S:
- Because it incorporates the TAULER_OIL system, which improves lamination and reduces energy consumption.
- Because it incorporates quick coil adjustment while the machine is running.
- Because it incorporates the TAULER_SHAFT SYSTEM, which facilitates quick film changes.
- Because it can stamp toner prints with its TAULER_FOIL system.
- For its intuitive touchscreen.
- Because it incorporates a REVERSE MODE to correct potential errors.
- Because it features the TAULER_GO ON automatic starting system.
- Because it has a stacking system that allows for palletized unloading.
Technical specifications:
- Automatic feeding with frontal suction and two suckers.
- Adjustable side brackets.
- Temperature control via sensor.
- Pneumatic pressure roller.
- Easily adjustable decurling system.
- Photocell that stops the machine in case of sheet failure.
- Total machine control through a PLC.
- Electronically adjustable speed.
- Microperforation cutting system and scissor roller.
Length [A]: 358 cm
Width [B]: 156 cm
Height [C]: 140 cm
Weight: 1,400 kg
Fill out the following form and get our catalog.
"*" indicates required fields
Technical data
| Maximum format | 550 x 790 mm |
| Minimum format | 220 x 250 mm |
| Speed | 2 – 25 m/min* |
| Paper thickness | 120 to 600 g/m² |
| Input Stack Height | 650 mm |
| Film Thickness | 20 to 50 microns |
| Installed Electrical Power | 8 kW |
| Power Supply | 380 V three-phase 50 Hz |
| Safety | CE-compliant protections, emergency stops, and safety sensors. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the specifications of its products in catalogs and website without prior notice. The image shown and the information reflected in this brochure do not establish contractual information. TAULER AND PRINTLAM ARE REGISTERED TRADEMARKS OF TAULER LAMINATING TECH, SL
Contact Form
"*" indicates required fields
